Quarzfinder - Resonators

Product Filter

Category

Device Type

Package

Manufacturer Filter

Manufacturer

Search your Part

Search by Manufacturer / Part Number

You should know ...

Our recommendations

The yellow shaded entries mark our product recommendations.

X-Ref - Competitor Part Cross Reference

Please select the competitor's name and part number. You will see a list of available crosses below.
This database will be updated regularly with new vendors and part numbers, please check back if the competitor you need is not listed.

RoHS II

RoHSAll products are RoHS II compliant, according to the Directive 2011/65/EU of the European Parliament.

Legal Advice

The information found in this Cross Reference section of our website is intended for reference/informational purposes only.
When researching crosses, please always review datasheets for complete information.
WDI AG does not guarantee the accuracy of this information and provides this section as a service to our customers.


Filter wird initialisiert

The requested frequency is not available from the selected manufacturer. Alternatively the following manufacturers offer this specification:


Updating


No products found.

Resonator - Ceramic SMD
ImagePackage FeaturesFrequencyManufacturers
7.4 x 3.4mm Low Resonant impedance 2.0 ~ 8.0 MHz
7.4 x 3.4mm Built-in capacitance 2.0 ~ 8.0 MHz
6.0 x 3.0mm Low Resonant impedance 2.0 ~ 12.0 MHz
6.0 x 3.0mm Built-in capacitance 2.0 ~ 12.0 MHz
4.7 x 4.1mm Low Resonant impedance 6.0 ~ 60.0 MHz
4.7 x 4.1mm Built-in capacitance 6.0 ~ 60.0 MHz
4.5 x 2.0mm Low Resonant impedance 4.0 ~ 8.0 MHz
4.5 x 2.0mm Built-in capacitance 4.0 ~ 12.0 MHz
3.7 x 3.1mm Low Resonant impedance 8.0 ~ 60.0 MHz
3.7 x 3.1mm Built-in capacitance 8.0 ~ 60.0 MHz
3.2 x 1.3mm Built-in capacitance 8.0 ~ 12.0 MHz
2.5 x 2.0mm Low Resonant impedance 20.0 ~ 50.0 MHz
2.5 x 2.0mm Built-in capacitance 20.0 ~ 60.0 MHz
Resonator - Ceramic SMD - Seam Seal
ImagePackage FeaturesFrequencyManufacturers
5.0 x 5.0mm SAW Technology 292.0 ~ 980.0 MHz
5.0 x 3.5mm SAW Technology 292.0 ~ 980.0 MHz
3.8 x 3.8mm SAW Technology 292.0 ~ 980.0 MHz
3.0 x 3.0mm SAW Technology 292.0 ~ 980.0 MHz
Resonator - Ceramic THT
ImagePackage FeaturesFrequencyManufacturers
Refer to specification sheet Low Resonant impedance 1.8 ~ 8.0 MHz
Refer to specification sheet Low Resonant impedance 5.0 ~ 13.0 MHz
Refer to specification sheet Low Resonant impedance 13.01 ~ 50.0 MHz
Refer to specification sheet Low Resonant impedance 6.0 ~ 12.5 MHz
Refer to specification sheet Built-in capacitance 1.79 ~ 8.0 MHz
Refer to specification sheet Built-in capacitance 5.01 ~ 13.0 MHz
Refer to specification sheet Built-in capacitance 12.01 ~ 60.0 MHz
Refer to specification sheet Built-in capacitance 6.01 ~ 12.5 MHz
Resonator - Metal THT (Pin-Type)
ImagePackage FeaturesFrequencyManufacturers
TO-39 SAW Technology / One-Port 292.0 ~ 980.0 MHz
TO-39 SAW Technology / Two-Port 310.0 ~ 434.0 MHz
Resonator - Plastic THT
ImagePackage FeaturesFrequencyManufacturers
Refer to specification sheet Low Resonant impedance 190.0 kHz ~ 1.25 MHz